현재 위치: 홈 - 회사 정보 - 뉴스 - 모션제어용 엔코더 뉴스 - TONiC™ encoder system

New super-compact optical encoder offers speed, accuracy and reliability

현재 사용 중인 언어로는 이 페이지를 사용할 수 없습니다. Google Translate을 사용하여 자동 번역된 페이지 를 볼 수 있습니다. Renishaw에게는 이 서비스를 제공할 책임이 없으며 번역 결과를 저희가 확인하지도 않았습니다.
추가로 도움이 필요하시면 저희에게 연락해 주십시오.

TONiC™ is Renishaw’s new super-compact non-contact optical encoder that offers speeds up to 10 m/s and resolutions down to 5 nm for both linear and rotary applications.

페이지 내용 다운로드 현지 영업소로 문의하십시오 온라인 상담 센터

TONiC montage image Offering significant enhancements to Renishaw’s existing range of high speed non-contact optical encoders, TONiC™ also gives improved signal stability and long-term reliability, low cost of ownership and unrivalled simplicity.

TONiC readhead on RGS scale Motion system designers usually face a compromise between speed and accuracy. With the TONiC™ optical encoder, this dilemma is removed and even at resolutions as low as 0.1 µm offers speeds in excess of 3 m/s, across a variety of linear and rotary scale types. This includes a new version of Renishaw’s flexible gold tape scale which features the highly regarded customer selectable IN-TRAC™ optical reference mark, which is auto-phased simply by the press of a button. Uniquely, the IN-TRAC™ reference mark is directly embedded into the incremental channel, which maximises immunity to yaw-induced de-phasing and furthermore, ensures phasing is retained throughout the entire speed and temperature range.

TONiC readhead and interface on gold scale Renishaw’s range of optical encoders is widely recognised for giving machine builders fast and easy installation. In addition to the IN-TRAC™ bi-directional reference mark, the new TONiC™ encoder takes this simplicity to the next level by offering auto-calibration and a readhead with two integral diagnostic LEDs.

The new TONiC™ readheads may be small, but signal purity and stability are further enhanced by incorporating dynamic signal processing within the readhead, providing an ultra-low Sub-Divisional Error of better than ±30 nm. System designers can use an analogue 1 Vpp signal taken direct from the readhead, or use a digital output from the 15-pin D-type housing, offering interpolation and diagnostics. Long-term operational reliability is further assured with Renishaw’s proven filtering optics, which are now enhanced by Auto Gain Control for rugged signals that can withstand dust, scratches and even light oils on the scale.

As with all Renishaw encoders, the TONiC™ encoder system is also built to withstand difficult operating environments, with robust heat tolerance to 70 °C. Furthermore it satisfies the highest environmental standards, with both WEEE and RoHS compliance.