 | 평면 거울과 거울 마운트현재 사용 중인 언어로는 이 페이지를 사용할 수 없습니다. Google Translate을 사용하여
자동 번역된 페이지
를 볼 수 있습니다. Renishaw에게는 이 서비스를 제공할 책임이 없으며 번역 결과를 저희가 확인하지도 않았습니다.
RLE systems containing retroreflector configured detector heads already contain the necessary retroreflector target optic(s). For applications that use a standard double pass or differential interferometer configuration, Renishaw can, if requested, supply plane mirror optics and adjustable mirror mounts. Plane mirrors
Summary plane mirror specification
Mirror mounts
These mounts provide up to ±2.5° yaw adjustment and ±1° pitch adjustment. (Actual adjustment range is dependent on mirror length.) Renishaw supplied mirror mounts are not vacuum compatible.
Zerodur® is a registered trademark of Schott Glass Technologies Incorporated. Documents and downloads다음 단계자세한 정보 또는 가격 관련 문의 에 대해 온라인 상담을 요청할 수도 있고, 현지 Renishaw 사무소 로 직접 문의할 수도 있습니다. |
To complete an RLE interferometer system requires only one additional, external optical component fitted to each motion system axis. (When using the differential interferometer, optics are required on the motion system and a fixed reference point e.g. column or tool.)
Renishaw supplied plane mirrors are manufactured on a Zerodur® (or similar) substrate and have a hard oxide dielectric coating.
To enable mirrors to be mounted and correctly aligned to the motion system, Renishaw can also provide adjustable mounts for use with mirrors up to 350 mm in length, which have a cross section of 25 mm x 25 mm.