RP3현재 사용 중인 언어로는 이 페이지를 사용할 수 없습니다. Google Translate을 사용하여
자동 번역된 페이지
를 볼 수 있습니다. Renishaw에게는 이 서비스를 제공할 책임이 없으며 번역 결과를 저희가 확인하지도 않았습니다.
추가로 도움이 필요하시면
저희에게 연락해 주십시오.
 RP3 tool setting probe for HPRA, HPPA and HPMA arms.
The RP3 is also suitable for OEM installation into purpose-built holders. About RP3
 The RP3 probe is suitable for OEM installation into purpose-built holders, or for use with Renishaw''s automatic or manual tool setting arms.
A robust 5-way probe for tool setting and some inspection applications. Advanced design has produced an extremely small probe with 1µm repeatability and large over-travel.
The MI 8-4 interface is required for use with the RP3 hard-wired probe.
RP3 features and benefits
-
1 µm repeatability
-
Compatible with the full range of Renishaw M4 styli
-
Standard fit HP series toolsetting arm (HPRA, HPPA and HPMA)
-
Flexibility - OEM kit available for OEM installations
-
Large 9° of over-travel - increases the durability of the probe
RP3 specification
| Specification |
|
| Sense directions |
±X, ±Y, +Z |
| Weight |
80 g (3 oz) |
| Uni-directional repeatability (max 2 sigma at stylus tip) |
1.0 µm (0.00004 in) |
|
Trigger force
XY plane - lowest force
XY plane - highest force
+Z direction |
1.5 N (5.3 ozf)
3.5 N (12.3 ozf)
12.0 N (42.3 ozf) |
|
Stylus overtravel
XY plane
+Z direction |
±9°
2 mm (0.08 in) |
| Recommended stylus length |
48.75 mm (1.90 in) |
| Sealing |
IP X8 |
| Mounting |
Refer to user's guide for customer integration details. |
|
Compatible interface |
MI 8-4 |
RP3 ordering information
| Part Number |
Description |
| A-2197-0049 |
RP3 probe |
| A-2197-0007 |
RP3 OEM Kit | Lathe tool setting HP tool setting arms  High precision manual and motorised tool setting arms for turning centres.
| 