EasyProbe
최소한의 프로그래밍 지식으로 작업 설정 및 측정 루틴 작성이 가능합니다.
간단한 프로그래밍
정확한 공작물 포지셔닝을 위해 업데이트된 워크 오프셋
결과 및 오차를 매크로 변수에 저장
EasyProbe 소프트웨어 정보
EasyProbe는 G-code 프로그래밍에 대한 지식 없이도 간단히 작업 설정 및 구성품 측정 작업을 수행할 수 있도록 설계되었습니다.
호환되는 CNC 공작 기계 제조업체 및 모델에 맞춰 제공되는 설치 유틸리티를 사용하는 EasyProbe는 4점 내경/외경, 2점 외폭/내폭, 각도 검색, 단일 표면 측정, 프로브 길이, 스타일러스 오프셋 보정 등 광범위한 측정 사이클을 제공합니다.
기능 및 이점
- 간단한 프로그래밍: 최소한의 작업자 기술만 필요
- 정확한 구성품 포지셔닝이 가능하도록 워크 옵셋 업데이트
- 측정 결과 및 오차를 매크로 변수에 저장
- 안전이송 가능
- MDI 모드에서 사용하거나 자동 작동을 위해 가공 프로그램에 사이클 작성 가능
관련 자료
-
Data sheet: Probe software for machine tools : programs and features [en]
Overview of the available range of macro software packages.
-
Technical specifications: Probing systems for CNC machine tools 2020 [en]
The type of probing system that you need will depend on your machine tool and the nature of the probing application. This document focuses on the main applications for probing on machine tools. It contains an introduction to the use of probing for each application, plus guidance on the selection of the most appropriate system and technical information about each probe.