CMM 픽스쳐 제품 예
조정 가능한 클램핑, 자석, 타워 및 스탠드오프 구성품 응용 분야를 포함하여 모듈식 CMM 픽스쳐 셋업 예를 확인하십시오.
조절형 모듈식 예
-
Application image adjustable angle plate
Fixturing application image using adjustable angle plate, tension clamps, standoffs
[6000 x 4000] [2.5MB] -
Adjustable angle plate and stand off
Adjustable angle plate application image with magnetic pin stand off and towers
[6000 x 4000] [2.5MB] -
Metal part held with Wedge stops, Standoffs, Spring wedge clamp and Adjustable slide
Metal part held with Wedge stops, Standoffs, Spring wedge clamp and Adjustable slide
[800 x 800] [174kB] -
-
-
Cast iron part held using Rotating 3 Jaw clamp
Cast iron part held using Rotating 3 Jaw clamp
[800 x 800] [178kB] -
Aluminum part held with Towers and Adjustable slide bases
Aluminum part held with Towers and Adjustable slide bases
[800 x 800] [120kB] -
Part held using adjustable height stands, V magnet and standoffs
fixturing fixtures adjustable height stand v magnet standoff cmm
[800 x 800] [168kB] -
Ø16 mm adjustable aluminium jack stand with M6 thread
This adjustable jack stand is ideal for holding fixturing components at variable heights. It is recommended for use on CMMs, the Equator™ gauging system, and vision and multi-sensor machines
[600 x 600] [102kB] -
Plastic held using adjustable height stand, adjustable jackstand, adjustable slide, V magnet
Fixturing example for the adjustable gallery showing a plastic part being held using an adjustable height stand, adjustable jackstand, adjustable slide and v magnet.
[600 x 600] [112kB] -
클램프 모듈식 예
-
Application image with spring wedge clamp and wedge stop
Application image with spring wedge clamp and wedge stop
[6000 x 6000] [6.0MB] -
Metal part held with Wedge stops, Standoffs, Spring wedge clamp and Adjustable slide
Metal part held with Wedge stops, Standoffs, Spring wedge clamp and Adjustable slide
[800 x 800] [174kB] -
Holding a metal part using spring wedge clamps
R&R fixturing example for spring wedge clamps holding a metal part
[800 x 801] [161kB] -
63.5 mm tension clamp with 68 mm post
This tension clamp is used for the quick and easy clamping of parts onto CMM and Equator™ gauging systems.
[360 x 360] [59kB] -
96 mm tension clamp with 83 mm post
This tension clamp is used for the quick and easy clamping of parts onto CMM, Equator™, vision and multi-sensor machines.
[360 x 360] [60kB] -
Fixturing example using an adjustable V post
The M6 adjustable V post is used to hold cylindrical or tubular parts without marking their surface.
[600 x 680] [640kB] -
-
Application image adjustable angle plate
Fixturing application image using adjustable angle plate, tension clamps, standoffs
[6000 x 4000] [2.5MB] -
Ø19 mm x 25 mm spring pusher standoff clamp with M6 thread
This spring pusher standoff clamp is designed to fixture parts in tight spaces, removing the need for tension clamps. It is ideal for positioning parts and profile clamping on circular components. It is recommended for use on CMMs, the Equator™ gauging system, and vision and multi-sensor machines.
[600 x 600] [104kB]
자석 모듈식 예
-
Adjustable angle plate and stand off
Adjustable angle plate application image with magnetic pin stand off and towers
[6000 x 4000] [2.5MB] -
CMM fixture setup with a range of standard clamping and magnetic components
No description available
[4129 x 2824] [1.3MB] -
-
-
Steel part being held with pin magnets and standoffs
Fixturing example showing a steel part being held with pin magnets and standoffs.
[662 x 800] [172kB] -
Various steel parts being held with pin magnets, magnets, standoffs and tension clamp with plunger
Fixturing example showing various steel parts being held with pin magnets, magnets, standoffs, and a tension clamp with plunger.
[800 x 800] [162kB] -
Steel part held using v-magnets, adjustable slide and adjustable height stand
Fixturing example showing a steel part being held using V-magnets, adjustable slide, and adjustable height stand.
[800 x 800] [143kB] -
Cast iron part held using pin magnets
Fixturing example for the R&R website showing a cast iron part held using pin magnets.
[800 x 800] [152kB] -
Steel Part Held using magnets, adjustable slide and adjustable jackstands
No description available
[800 x 800] [507kB] -
Steel Part Held using magnets, adjustable slide and adjustable jackstands
No description available
[800 x 800] [507kB]
타워 모듈식 예
-
-
25 mm² x 300 mm tower (4 sides, 1 row)
This tower is used to fixture large components or to hold a part vertically. It has M6 threaded holes spaced at 12.5 mm intervals and is recommended for use on CMM machines and the Equator™ gauging system.
[360 x 360] [84kB] -
25 mm² x 300 mm tower (4 sides, 1 row)
This tower is used to fixture large components or to hold a part vertically. It has M6 threaded holes spaced at 12.5 mm intervals and is recommended for use on CMM machines and the Equator™ gauging system.
[360 x 360] [68kB] -
Sheet metal part being held to towers with adjustable slides
R&R fixturing example showing a sheet metal part being held to towers with adjustable slides.
[606 x 606] [107kB] -
-
-
25 mm² x 300 mm tower (4 sides, 1 row)
This tower is used to fixture large components or to hold a part vertically. It has M6 threaded holes spaced at 12.5 mm intervals and is recommended for use on CMM machines and the Equator™ gauging system.
[360 x 360] [84kB] -
16 mm² x 41 mm tower block with base
This tower block with base is used to position fixturing components vertically. When used without the base, a full rotation is possible. It is recommended for use on CMMs, the Equator™ gauging system, and vision and multi-sensor machines.
[600 x 600] [98kB] -
-
Aluminum part held with Tower, Adjustable slides, Standoffs and Adjustable jack stand
Aluminum part held with Tower, Adjustable slides, Standoffs and Adjustable jack stand
[800 x 800] [178kB]
스탠드오프 모듈식 예
-
Metal part held with Wedge stops, Standoffs, Spring wedge clamp and Adjustable slide
Metal part held with Wedge stops, Standoffs, Spring wedge clamp and Adjustable slide
[800 x 800] [174kB] -
-
Part held using adjustable height stands, V magnet and standoffs
fixturing fixtures adjustable height stand v magnet standoff cmm
[800 x 800] [168kB] -
-
-
-
-
Ø12 mm x 25 mm aluminium standoff with M4 thread
This aluminium standoff is ideal to elevate and locate parts. It is hard coat anodised and recommended for use on CMMs, the Equator™ gauging system, and vision and multi-sensor machines.
[600 x 600] [127kB] -
Ø19 mm x 25 mm spring pusher standoff clamp with M6 thread
This spring pusher standoff clamp is designed to fixture parts in tight spaces, removing the need for tension clamps. It is ideal for positioning parts and profile clamping on circular components. It is recommended for use on CMMs, the Equator™ gauging system, and vision and multi-sensor machines.
[600 x 600] [104kB] -
-
Aluminum part held with Standoffs and Cones
Aluminum part held with Standoffs and Cones
[800 x 800] [208kB]
